December 9, 2017

One of the strengths of metal printing is the ability to consolidate
parts. Because of the design freedom offered by 3D printing, factors
such as tool paths, undercuts and assembly access can all be ignored,
allowing full assemblies to be produced as in a single 3D pri...

July 9, 2017

MachineDesign recently published an article about our 4x4 monopulse array antenna.

Simulation and optimization help to develop a smaller, lighter antenna that could be made quickly.

http://www.machinedesign.com/3d-printing/3d-printing-takes-parts-count-100-1-antenna

December 19, 2016

The first test piece that Optisys put together was a K-band monopulse comparator with SMA connectors.  We wanted a demonstration piece with test data that could be put into customer hands to show how RF and mechanical designs could be realized in additive manufacturing...

August 3, 2016

The aerospace industry loves to work with 6061 aluminum.  It has good corrosion resistance and finishing ability and has good thermal conductivity.  The strength of the T6 temper is similar to that of mild steel.  So I hear a lot of clients, especially aerospace client...

July 22, 2016

­

If you do a google image search on metal Additive Manufacturing you will see a lot of images with lattice structures.  Why would this be so?

First of all, no other process can do it.  These intricate structures, especially with small feature sizes, can’t be manufacture...

Please reload

Recent Posts

February 18, 2020

Please reload

Archive

Please reload

Tags

Follow

  • LinkedIn Social Icon

Contact

Service@optisys.tech

801-664-5595

Address

COPYRIGHT © 2020 OPTISYS.  ALL RIGHTS RESERVED        AS9100, IS09001